LEMD20series(20motors,one side is 10motors) glass straight line double edging machine is suitable for grinding two straight-line edges of tempering glass, furniture glass, architecture glass, electronic glass and so on; it has characters of rapid processing speed, high glass processing precision, high brightness. The machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw. It is equipped with PLC system on the electric control part. It fixed superior man-machine interface screen operation system.
|
Model |
|
|
|
|
|
|
|
LEMD1620 |
2 00mm |
16 00mm |
3- 30 mm |
0. 5 -6 .5 m/min |
47.4 KW |
5700 kg |
|
LEMD2020 |
2 00mm |
20 00mm |
3- 30 mm |
0. 5 -6 .5 m/min |
47.4 KW |
6100 kg |
|
LEMD2520 |
28 0mm |
25 00mm |
3- 30 mm |
0. 5 -6 .5 m/min |
47.4 KW |
6500 kg |
|
LEMD3020 |
3 00mm |
30 00mm |
3- 30 mm |
0. 5 -6 .5 m/min |
47.4 KW |
6900 kg |
|
LEMD4220 |
3 00mm |
42 00mm |
3- 30 mm |
0. 5 -6 .5 m/min |
47.4 KW |
7800 kg |
ATechnical specification:
Model:LEMD4220 (20motors/4.2m):
|
Parameters |
Model specifications |
|
LE M D42 20 |
|
Spindle numbers for each side (pc) |
10 |
|
Transmission speed （ m/min ） |
0.5—6.5 m/min |
|
Thickness of glass （ mm ） |
3- 30 mm |
|
Min glass processing size (mm) |
30 0mm |
|
Max glass processing size （ mm ） |
42 00 mm |
|
Max weight for Glass Transfer |
500kgs |
|
Height for the Transfer Table |
900±20mm |
|
Rectangularity error ( +- mm/m ) |
≤0.1 mm/m |
|
Parallel Degree error ( + -mm/m ) |
≤0.5 mm/m |
|
Inverse corner width |
1-3mm |
|
Max. Bottom Margin grinding （ can quickly adjust ） |
Single side 3 mm |
|
Max chamfer angle grinding |
3 mm |
|
Weight |
58 00 kgs |
|
Installed power （ k W ） |
47.4kW |
|
Voltage （ V ） |
380V / 50Hz or customized |
|
Compressed air input （ Mpa ） |
0.4--0.8 |
|
Overall noise (measured from the body 1m) |
70dB |
|
Temperature |
-10—50 ℃ |
|
The overall operation without abnormal noise. |
MAIN SPARE PARTS LIST
|
No. |
Parts Name |
Brand |
|
1 |
Grinding Motor |
ABB Motor |
|
2 |
Transmission Shaft Motor |
CDQC frequency conversion motor |
|
3 |
Timing belt |
Barbieri （ Italy ） |
|
4 |
S traight line guide |
Boscn Rexroth ( German y) |
|
5 |
B all Screw Shaft |
ABBA （ Taiwan ） |
|
6 |
photoelectric switch |
Panasonic ( Japan ese) |
|
7 |
Frequency converter |
TAIAN (Taiwan) |
|
8 |
PLC |
SIEMENS(Germany) or DELTA（ Taiwan ） |
|
9 |
Touchscreen |
SIEMENS(Germany) |
|
10 |
circuit-breaker \connector |
Schneider (France) |
|
11 |
Intermediate Relay |
OMRON |
|
12 |
Position encoder |
Japan’s Omron |
|
13 |
C ooling tank 、 Middle water tank |
S tainless steel |
Advantage:
1. The body of machine we will use anti-subversion and anti-seismic deformation to design, it is stable and reliable.
2. Mainly transferring will use humanized design, it is very convenient for installation and maintain; well Technology, well Synchronous, it is ensure the glass is suitable for the size requirement.
3. The polishing part used the special design: Small vibration, well holding capacity, quickly action; this structure enables the polishing effect is better and more stable.
4. The timing belt used Italy MGEGADYNE or BARBIERI and so on famous brand; It is ensure the glass size and technical requirement.
5. Each part is according to strict and rigorous quality inspection
6. Chamfer and compress will use full- automatic lifting structure. |
Details
