LEMD20series(20motors,one side is 10motors) glass straight line double edging machine is suitable for grinding two straight-line edges of tempering glass, furniture glass, architecture glass, electronic glass and so on; it has characters of rapid processing speed, high glass processing precision, high brightness. The machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw. It is equipped with PLC system on the electric control part. It fixed superior man-machine interface screen operation system.
1).The whole line is composed of Two Double Edging Machines and One L-shape Automatic Transfer Table; the structure is simple and stable, it also is for floor area saving. It can process the four sides at one time.
2).The automatic transfer table is widely used for all types of glass, big or small, thick or thin, and takes advantages of high transferring efficiency and flexible con figuration.
Advantage:
1. The body of machine we will use anti-subversion and anti-seismic deformation to design, it is stable and reliable.
2. Mainly transferring will use humanized design, it is very convenient for installation and maintain; well Technology, well Synchronous, it is ensure the glass is suitable for the size requirement.
3. The polishing part used the special design: Small vibration, well holding capacity, quickly action; this structure enables the polishing effect is better and more stable.
4. The timing belt used Italy MGEGADYNE or BARBIERI and so on famous brand; It is ensure the glass size and technical requirement.
5. Each part is according to strict and rigorous quality inspection
6. Chamfer and compress will use full- automatic lifting structure.
Technical specification:
1. 1st Double Edger –LEMD4220 (20motors/4.2m):
|
Parameters |
Model specifications |
|
LE M D42 20 |
|
Spindle numbers for each side (pc) |
10 |
|
Transmission speed （ m/min ） |
0.5—6.5 m/min |
|
Thickness of glass （ mm ） |
3-25 mm |
|
Min glass processing size (mm) |
30 0mm |
|
Max glass processing size （ mm ） |
42 00 mm |
|
Max weight for Glass Transfer |
500kgs |
|
Height for the Transfer Table |
900±20mm |
|
Rectangularity error ( +- mm/m ) |
≤0.1 mm/m |
|
Parallel Degree error ( + -mm/m ) |
≤0.5 mm/m |
|
Inverse corner width |
1-3mm |
|
Max. Bottom Margin grinding （ can quickly adjust ） |
Single side 3 mm |
|
Max chamfer angle grinding |
3 mm |
|
Weight |
78 00 kgs |
|
Installed power （ k W ） |
47.4kW |
|
Voltage （ V ） |
380V / 50Hz or customized |
|
Compressed air input （ Mpa ） |
0.4--0.8 |
|
Overall noise (measured from the body 1m) |
70dB |
|
Temperature |
-10—50 ℃ |
|
The overall operation without abnormal noise. |
2. L type Transferring Table：
|
Parameters |
Model specifications |
|
4225 |
|
Transmission speed （ m/min ） |
0.5 -6.5m/mi n |
|
Thickness of glass （ mm ） |
3-25 mm |
|
Glass Min. size ( mm ） |
300x300 mm |
|
Glass Max. size (mm) |
4200x25 00 mm |
|
Motivity Mode |
Frequency Conversion Motor |
|
Control Mode |
PLC |
|
Transmission |
Rollers & lifting system |
|
Installed power （ k W ） |
2.5 k W |
|
Voltage （ V ） |
380V / 5 0H z or customized |
|
Compressed air i n put （ Mpa ） |
0.4--0.8 |
|
Overall noise (measured from the body 1m) |
70dB |
|
Temperature |
-10—50 ℃ |
|
The overall operation should be without abnormal noise. |
3. 2st Double Edger –LEMD2520 (20motors/2.5m)：
|
Parameters |
Model specifications |
|
LEMD2520 |
|
Spindle numbers for each side (pc) |
10 |
|
Transmission speed （ m/min ） |
0.5 — 6.5 m/min |
|
Thickness of glass （ mm ） |
3-25 mm |
|
Min glass processing size (mm) |
280mm |
|
Max glass processing size （ mm ） |
2500 mm |
|
Rectangularity error ( +- mm /m ) |
≤ 0. 1 mm/m |
|
Parallel Degree error ( + - mm /m ) |
≤ 0.5 mm/m |
|
Inverse corner width |
1-3mm |
|
Max. Bottom Margin grinding （ can quickly adjust ） |
S ingle side 3 mm |
|
Max chamfer angle grinding |
3 mm |
|
Weight |
6500 kgs |
|
Installed power （ k W ） |
47.4kW |
|
Voltage （ V ） |
380V / 5 0H z or customized |
|
Compressed air i n put （ Mpa ） |
0.4--0.8 |
|
Overall noise (measured from the body 1m) |
70dB |
|
Temperature |
-10—50 ℃ |
|
The overall operation without abnormal noise. |
|
Details
